UFR1-UNT-SM GreenKi Finger- & Card reader + 12V DC power supply + SM security module

GreenKi UFR1
+ "12V/DC flush-mounted power supply"
+ "SM security module"

The GreenKi UFR1 is a fingerprint and RFID card reader with a capacitive finger sensor.

How does a capacitive finger sensor work?

The capacitive finger sensor consists of two layers of conductive material separated by a layer of insulation. When a finger touches the surface of the sensor, there is a change in capacitance that is detected by the sensor's electronics, which converts the change in capacitance into an electronic signal, which is then analyzed by a microcontroller and precisely matches the data to existing data sets.

What is the advantage of a capacitive scanner?

The capacitive finger scanner is very fast, precise and reliable. It captures the unique features of the fingerprint (lines and ridges) and can identify them very accurately. Since every fingerprint is unique, it is almost impossible to manipulate or deceive a capacitive finger scanner. As a result, it offers greater security than other types of finger scanners, as it not only scans the surface of the finger, but also the underlying tissue.
Another advantage of the capacitive finger scanner is its speed. In a matter of seconds, it can carry out a comparison with stored fingerprints and thus enable access to front doors, rooms, gates or other objects.
In summary, the GreenKi UFR1 is a modern, secure and efficient way of identification and access control.
The speed and precision make it an ideal solution for anyone who relies on modern personal identification options and, in combination with the GreenKi SM module, on a high security standard.

How are the fingers and RFID transponders trained on the GreenKi UFR1?

1. Place the supplied master card once on the GreenKi UFR1.
2. Place the finger to be saved three times on the finger sensor.
3. Place the master card once again on the GreenKi UFR1.
(The process is identical for RFID transponders, instead of placing your finger on the RFID transponder once)

How are the fingers and RFID transponders deleted from the GreenKi UFR1?

1. Place the supplied master card twice in a row on the GreenKi UFR1.
2. Place the finger to be deleted once on the finger sensor.
3. Place the master card once again on the GreenKi UFR1.
(The process is identical for RFID transponders, instead of placing your finger on the RFID transponder once)

Why is the 12V/DC flush-mounted power supply required?

The GreenKi UFR1 is a technical device that requires a stable and reliable power supply to function properly. The 12V/DC UP power supply is an ideal solution for powering the GreenKi UFR1. Thanks to the included 12V/DC UP power supply, a stable and constant power supply is ensured, which is essential for the correct functioning of the GreenKi UFR1.

What is the advantage of an SM security module?

It is recommended to operate the GreenKi UFR1 in combination with an SM security module. The SM security module is an additional security measure that is able to prevent sabotage attempts by third parties in the area of the entrances to prevent. The installation of the SM security module is easy and can be carried out in just a few steps. The 12V/DC flush-mounted power pack and the SM module are installed indoors (e.g. meter cabinet or in a flush-mounted switch box). The GreenKi UFR1 and the door opener, automatic lock or gate operator are connected to the SM module. When dismantling the GreenKi UFR1, the SM module is activated and permanently disconnects the connection between the GreenKi UFR1 and the door, making external manipulation almost impossible. This makes the GreenKi UFR1 the perfect safety precaution and an important part of your safety system.

TECHNICAL DATA

User capacity

• Fingerprint: 100 fingers
• RFID: 3000 FOB / cards

Operation voltage

• 12V - 24V DC (with SM-Modul)
• Standby: < 0,3W (without SM-Modul)
• Operation: < 1,2W (without SM-Modul)

Capacitive fingerprint sensor

• Resolution: 500DPI
• Reading speed: < 1 Sekunde
• FAR: < 1%
• FRR: < 0.001%

Close range card reader

• Frequency: 125 kHz
• Reading Distance: 20 mm

Relay

• Switching time setting: 0 - 99 seconds
• Switching-load: 2A

Protection class

• Meets: IP66

Vicinity

• Operating Temperature: -25°C ~ 60°C
• Operating humidity: 20%RH ~ 98%RH

Material

• Faceplate: V2A stainless steel
• Housing: plastic, black

Mass / Weight

• HxWxD: 90 x 90 x 25 mm
• Weight: 200g

Scope of delivery

• 1 pc. GreenKi UFR1
• 1 pc. Master-programming card
• 1 pc. Freewheeling diode
• 2 pcs. Pin-Torx security screws (mounting on flush-mounted switch boxes)
• 1 pc. Pin-Torx screwdriver
• + 1 pc. flush-mounted power supply 12V/DC 18W
• + 1 pc. SM security module